Whitecap Teak Grating Material

Description

Build your own customized cockpit grate with Whitecap's notched grating material in three thickness/cutout sizes with corresponding flat grate strips. A grate can be built two ways: Use notched strips in both directions, or use notched strips in one direction on the bottom layer and flat strips in the opposite direction on the top layer. This construction style will allow water to drain underneath grates installed on flat surfaces. When building a grate use materials that are all the same thickness, 1/2", 3/4" or 1". Length: 4'. 1/2" Grate Material: Use for icebox grating or where the grate will not need to support a significant load. 3/4" Grate Material: Use in showers or cockpits with relatively flat configurations. 1" Grate Material: Use in cockpits with a significant slope, or places where grating would be required to carry a heavy load.