JABSCO #30573-0003, MINI ACCUMULATOR TANK.

Description

MINI ACCUMULATOR TANK 0.6 litre (with membrane) This accumulator tank is intended for installation in any pumped water system controlled by a pressure switch, and may also be used with air-driven pumps. The tank can serve as a storage vessel as well as a pulsation dampener for pressurized fluid. The accumulator tank smoothes water flow and reduces on/off switch cycling of the pump by lessening the variation in pressure and flow between the pump and the system discharge points. The even flow of water gives better control of hot water temperature with systems using instant water heaters. Snap-in Port Fittings included: 1/2" Barbed Hose Fittings and1/2" Threaded Hose Fittings Dimensions: 214mm long, 119mm wide, 110mm deep Output: nominal 0.6 litre, working capacity up to approximately 0.3 litres Plastic vessel with internal membrane. May be mounted in any attitude Compact size for small pressure systems (typically 1 - 2 outlets). Tank: Food grade materials, NSF Standard 18 listed Air Fill Valve  standard automotive style tire valve Actual Weight: 0.61 Kg Specifications: Capacity: 0.65 (Litres), 21.5 (fl oz) Pre-Charged Pressure: 0.7 (bar), 10 (psi) Regulated Pressure: 8.6 (bar), 125 (psi) Weight: 0.7 (kg), 1.6 (lb) Dimensions: 21.4 x 11.9 (cm), 8.4 x 4.7 (inches) | MINI ACCUMULATOR TANK 0.6 litre (with membrane) | This accumulator tank is intended for installation in any pumped water system controlled by a pressure switch, and may also be used with air-driven pumps. | The tank can serve as a storage vessel as well as a pulsation dampener for pressurized fluid. The accumulator tank smoothes water flow and reduces on/off switch cycling of the pump by lessening the variation in pressure and flow between the pump and the system discharge points. | The even flow of water gives better control of hot water temperature with systems using instant water heaters.