WEST SYSTEM #610, Six10 THICKENED EPOXY ADHESIVE.

Description

Six10 Thickened Epoxy Adhesive combines the strength and reliability of a two-part WEST SYSTEM Brand Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun. Six10`s shear thinning properties make it "thinner" as it`s worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies. Each tube of Six10 comes equipped with a static mixing wand. (Additional 600 Static Mixers are available in packages of two. ) It cures in temperatures as low as 50F. Working time is 42 minutes at 72F. Cures to a solid in 56 hours and will take high loads in 24 hours. Cure time is faster at warm temperatures and slower in cool temperatures. The Six10 cartridge holds 190ml of resin and hardener. To use Six10 Adhesive, replace the retaining nut and plug on the West SystemSix10 dispensing cartridge with the 600 Static Mixer that comes attached to the cartridge. Dispense mixed 2-part epoxy adhesive using a standard caulking gun. The efficient internal geometry of the 600 Mixer thoroughly blends resin and hardener in a short mixing length for good application control and a minimum of waste. Place high-strength, non-sagging epoxy exactly where its needed in less time and with no mess. Additional 600 Static Mixers are available in packages of two.